Rendering a house – here’s everything you need to know

Do you want to improve the appearance of your home?we got this outer surface

The presence of property is part of preventing property. That’s why repainting a house is so popular. However, this type of exterior cladding has advantages over mere aesthetics. You can also protect the exterior of your home.

There are different types of stucco, from the clever stucco construction of Georgian houses to post-war cobblestone streets, colorful monochrome sofas, modern silicone and traditional stucco. These different materials not only provide a unique appearance, but also match certain types of properties.

‘Sam Piplica, MRICS, RICS Building Standards Specialist, Royal Society of Notary Surveyors says: The choice of rendering and its use should be appropriate to the asset and its location.

Representation of a house – downhill

The purpose of plastering is usually to improve appearance, prevent water ingress and increase weatherability. Therefore, plaster can only be applied to an existing building if the walls are intact and free of moisture.

“First, you have to consider the type of structure of the wall and, most importantly, how the existing structure manages the water.Sam Piplica, MRICS, Senior Building Standards Specialist at RICS.

‘Before rendering, someone must identify and understand any defects, assess asset exposure, determine suitable products, and review intricate details. Such an important decision was not made on the spot. Homeowners can do this, but if they don’t have the time or experience, a licensed building inspector can help.

What are the different rendering types?

cement plaster

This is one of the cheapest options and provides a flat surface but is not suitable for older buildings with solid walls (no niches).prone to cracking It must be kept in perfect condition. It also needs to be repainted every few years..

‘C’Cement-based plastering on solid walls prevents water from evaporating from the outside of the structure,” he said. Sam Piplica, Building Standards Specialist. This means that if water doesn’t come out, it will come in. Proper use requires good maintenance.A generationIf it breaks and rain enters from behind, water will not be able to evaporate through it. This can cause internal and external problems.

painted lime

This type is more expensive than cement stucco and is often used in traditional wooden houses. Rapper Graeme Rudd said: “Gyster lime is often used in wet old venues or where increased airflow is required.

silicone plaster

‘Experts say silicone plasters are a great product because they are low-maintenance, long-lived, and resistant to cracking. Castrio Recca The first renderer. “They are lightweight, breathable, highly waterproof and available in a variety of colours. They can also be fitted with external insulation.

Monocouche rendering (pass)

This is a cement based putty that has paint in it so no coating is required. Can be used on most polymer, stone and brick structures. It has the versatility of traditional gypsum coatings and is a low-maintenance option.

Acrylic plaster

Acrylic resin has been added to this plaster to make it more waterproof and flexible. They also come in a variety of colors, but they are the least breathable.

cork plaster

This is a relatively new material in the UK and is more environmentally friendly than other plaster. Can be applied to brick and niche walls, over existing (undamaged) plaster, for on-site repairs. It is also resistant to sea salt, making it ideal for coastal destinations.

Joff Ward, CEO of CorkSol UK, said: “Flexibility and elasticity are two properties of the hat, making it very durable. “Sprayed cork putty has been shown to reduce heat loss from solid walls by 30% and has sound absorbing properties. It has a smaller and cleaner carbon footprint than conventional counterparts. can be substituted.

Can I mix materials?

Painting homes with multiple materials is becoming more and more popular. The canola and dunnage combo is especially popular, and you’ll see why!

However, if you plan to incorporate finishes, keep in mind the added cost of finishing. The cost of using fewer quantities and more materials is high, as is hiring different professionals to use them. You also need to make sure the materials are installed in the correct order and that the joints between them are clean.

Description of Brick House

‘If the home has not been foreclosed beforeThe first question is, why show it now? Why not repair the existing material properly? “Glab is not as durable as traditional bricks,” said building standards expert Sam Piplica. Neither do I.If for aesthetic reasons, such as covering damaged bricks, remember that plaster also needs to cure to keep it in good condition. In addition to the bricks, curing must also take place.

Determining whether existing plaster can be repaired is more environmentally friendly than replacing it. Products made from lime and cement have a large carbon footprint due to their manufacturing process, so the maintenance of a building consumes less material than new work over its life cycle.

Rendering of a wooden house.

Avoid unventilated dressings. Silicone or cork aids in breathing and prevents algae or mold growth, so they fit nicely. However, historical properties require careful evaluation. ‘Always seek professional advice before restoring or restoring a traditionally built timber house, preferably someone who is RICS Building Conservation Certified and certified in Historic Architecture,” says Sam Piplica.

repair a row of houses

If you live in a row of patios, think about how your house’s plastered exterior will compare to your neighbors. Avoid any disputes by telling them your plans ahead of time.

We are drawing a house with shingles.

Pebble Dash can be displayed as long as it is in good condition. “If you increase wall thickness, you may need to consider details around gutters and drains, boiler chimneys and drain lines,” says Mark Brinkley, author of the Home Builder’s Bible, Mark Brinkley, author of the Home Builder’s Bible Linkley said.

“Experienced teams know how to deal with them, but hurried work can lead to frustration. Also, check to make sure the extra depth of your proposed new overlay doesn’t interfere with neighbouring entrances or the layout of the property.

How much to rent?

This depends on several factors, such as the type and location of the property. DPR People’s Council chairman Michael Van Vielette said: “It usually depends on the necessary preparations and the condition of the existing home. “Prices can start from around £5,000, but can go higher depending on the size and condition of the property. “

Does representing a home add value?

Mark Brinkley, author of the Housebuilders Bible, said: “If it looks old and the outside is in poor condition, a new plaster coat will definitely add to the value of the home. “But if the house has interesting details like smooth bricks Blending in nicely with the adjoining properties, then the new stucco coat may affect the overall look. “

Can I make my own wall?

To make sure the rendering does its job, we recommend for example:Hire a professional to do it the right way. Apart from, Insulation requires special expertise and compliance with building codes.

Graeme Rudd of Raster People’s Plastering said: “Rendering is usually a job of two or three people, large areas need to be done in one batch, so you should not do it yourself.” Graeme Rudd of Raster People’s Plastering said. ‘Insulation can also be added and coated to increase the energy efficiency and value of your home.

Mark Brinkley, author of The Home Builders Bible, said: “Drawing is an art that takes years to master. Rendering abuse can seem scary. Check the standards of the people you meet and ask to see them Previous jobs.

Do I need a building permit to build a house?

Planning permission is usually not required unless you live in a nature reserve or AONB.

If exterior walls must be updated, building codes may apply depending on the scope of work. Therefore, please consult your local design department.

Rendering can be a specific RAL or British Standard (BS) colour if your property is listed and belongs to a property group. Before starting, review your case and role carefully.